Plastic turnover box should pay attention to the following points when using

2. When placing the goods, they should be placed evenly to avoid the sharp surface being pressed directly at the bottom of the turnover box, which will be tilted or damaged due to uneven force, and the goods in the box will be damaged more seriously.

3. When using supporting pallets, we should consider whether the size of the turnover box is suitable for the use of the plastic tray, to avoid the wrong size, improper placement and side tilt or reverse box.

4, stacking use, should consider their own turnover box bearing, stacking height limit.

The correct use of plastic turnover box should make the weight of a single box of goods not more than 25KG (normal body limit), and can not be filled with boxes, should leave at least 20mm (excluding the upper joint part), to prevent the goods directly contact with the bottom of the box, so that the product damaged or dirty.

The plastic turnover box is placed on the plastic tray with appropriate binding and wrapping, easy to use mechanical loading and unloading and transportation, so as to meet the requirements of loading and unloading, transportation and storage

Maintenance of plastic turnover box:

In order to make the plastic turnover box can be used safely for a long time, it is hoped that the plastic tray can be used correctly according to the following requirements:

1, plastic turnover box should be avoided from sunlight exposure, so as not to cause aging, shorten the service life.

2. It is strictly prohibited to throw the goods in the plastic turnover box from the height. Reasonably determine how goods are stacked in the turnover box. Goods should be placed evenly, not centrally or eccentrically.

3. It is strictly prohibited to throw the plastic turnover box from the height to avoid the crushing and cracking of the turnover box caused by violent impact.

4. During the operation of forklift or manual hydraulic truck, the fork spikes can be changed only after lifting the tray smoothly. Do not impact the side of the pallet to avoid breaking the pallet and indirectly damaging the turnover box and goods.

4. When the pallet is on the shelf, the pallet must be used. The bearing capacity is determined according to the structure of the shelf.